Social Media


Welcome, Guest
Username Password: Remember me

NEW CAR BUILD
(1 viewing) (1) Guest

TOPIC: NEW CAR BUILD

Re: NEW CAR BUILD 13 years, 10 months ago #9214

I keep a rag tucked next to the seat and drive with one hand

Usually the air moving through the car keeps the windows unfogged reasonably well once moving. Around the pit and grid, it can get pretty foggy.

I use the anti-fog stuff and really do keep a rag in the car with me. My heater/blower etc is long gone and I'm still trying to get the car to weight with an 89 chassis and my 250 LBs of lean muscle.

Re: NEW CAR BUILD 13 years, 10 months ago #9216

944Racer72 wrote:
I keep a rag tucked next to the seat and drive with one hand


Ah,
The Hans Stuck method... I saw him doing that at sebring back in 95 in a Turbo 993. Fun stuff.
Joe Paluch
944 Spec #94 Gina Marie Paper Designs
Arizona Regional 944 Spec Director, National Rules Coordinator
2006 Az Champion - 944 Spec Racer Since 2002

Re: NEW CAR BUILD 13 years, 10 months ago #9220

  • RacerX
  • OFFLINE
  • Endurance Racer
  • Posts: 351
I have heard of rubbing soap on the window for that but thought it was an old wives tale. Kind of messy too.
Ken Frey #3 944-Spec MW Region

"Racing is life! Anything that happens before or after is just waiting."

Check out my build thread!!
www.944-spec.org/944SPEC/forum/race-car-...d/9155-new-car-build

Re: NEW CAR BUILD 13 years, 10 months ago #9226

  • RacerX
  • OFFLINE
  • Endurance Racer
  • Posts: 351
I received a very good EM late this afternoon. Jason Schell, Head of the Marketing Dept. from GlowShift Gauges, will in part, be sponsoring our 944 build with their Elite Ten Series gauges! These gauges have a programmable min and max value with visual and audible alarms. www.glowshiftdirect.com/
I didn't forget you guys either. Jason and GlowShift Gauges have generously offered an additional 10% discount on any of their gauges. You can either EM him or use this discount code on line. Jason's EM is This e-mail address is being protected from spambots. You need JavaScript enabled to view it and make sure you include the code when corresponding with him. The code is 944Build2010 and expires in June 2011. Please take advantage of this and pass it along to anybody who might be interested.
Ken Frey #3 944-Spec MW Region

"Racing is life! Anything that happens before or after is just waiting."

Check out my build thread!!
www.944-spec.org/944SPEC/forum/race-car-...d/9155-new-car-build
Last Edit: 13 years, 10 months ago by RacerX.

Re: NEW CAR BUILD 13 years, 10 months ago #9230

  • RacerX
  • OFFLINE
  • Endurance Racer
  • Posts: 351
Back to the dash.... I thought I'd keep playing with this and see where it goes, after, all it's just my time so far.
This weights 7 lbs 4 oz.

PIC_6470_2010-12-23.JPG


I cut all the brackets out to lighten it up, made a template for the gauge opening and cut one out of sheet stock.

PIC_6519.JPG


Here is the rough fit.

PIC_6527.JPG


PIC_6544.JPG


I still have a bit more to go and plan on some flange holes in the back side of the dash to lighten it up further. At this point it weights 5 lbs 11 oz.
That's 1 lb 9 oz lighter, so far.
Ken Frey #3 944-Spec MW Region

"Racing is life! Anything that happens before or after is just waiting."

Check out my build thread!!
www.944-spec.org/944SPEC/forum/race-car-...d/9155-new-car-build
Last Edit: 13 years, 10 months ago by RacerX.

Re: NEW CAR BUILD 13 years, 10 months ago #9232

Cool, and inventive way to make a nice, lightweight, and cost-effective dash!
Eric Kuhns

National Director Emeritus

2007, & 2008 National Champion
2011, 2012 2nd
Moderators: joepaluch, tcomeau, KLR
Banner
Time to create page: 0.10 seconds