Social Media


Sponsors

New 944Spec legal DMEs for $325 with promo code thanks to our newest sponsor, Focus 9 Tech!

Focus 9 Technologies

Official 944Spec Tees with a discount code for site wide Track Monkey discounts!

Track Monkey Apparel

Affordable Shifter Solutions and Other Parts from Only944!

Only944.com

10% Off Transmission Service and Parts from Flying Horse Motorsport!

Flying Horse Motorsport

Toyo Tires

Hawk Performance

EASY Porsche

Time Stilling Photography

Apex Performance

Paragon Products

comeau racing

Hanksville Hot Rods


Tarett

Race Render

AutoPoint Motors

Dart Auto
Welcome, Guest
Username Password: Remember me
Forgot your password? Forgot your username?
944-SPEC
Racing Discussion
General

Want to get started
(1 viewing) (1) Guest
Reply Topic
New Topic

TOPIC: Want to get started

Re: Want to get started 7 years, 2 months ago #21798

brad.t wrote:
Well 2 years later I am ready to do this.

I have a 924S that was built for fun so it needs some work to move towards SP1.
Motor is a stock 87 N/A so low compression pistons (dang).
LSD trans, 968 M030 bars, 30mm torsion bars, 350lb springs over Konis, manual steering, manual windows, manual mirrors.
However it also has Stahl headers, Wilwood brakes, some bushings replaced with spherical bearings, aftermarket splitter, etc. So I have some un-modding to do.

It also needs a cage as it has a simple roll bar.

Forward half of the interior is still intact so there's some work to do there as well, thankfully most of the interior is gone already.

So be on the lookout for some WTB and some progress posts...


Welcome back, Brad

Let us know when you are ready to get started, it's about time for a Fall build party at the Chicken Shack 2.0!
#08
NASA Southeast
944-Spec
Reply Quote

Re: Want to get started 7 years, 2 months ago #21801

  • AgRacer
  • OFFLINE
  • Administrator
  • Posts: 712
Brian Evans wrote:
brad.t wrote:
Well 2 years later I am ready to do this.

I have a 924S that was built for fun so it needs some work to move towards SP1.
Motor is a stock 87 N/A so low compression pistons (dang).
LSD trans, 968 M030 bars, 30mm torsion bars, 350lb springs over Konis, manual steering, manual windows, manual mirrors.
However it also has Stahl headers, Wilwood brakes, some bushings replaced with spherical bearings, aftermarket splitter, etc. So I have some un-modding to do.

It also needs a cage as it has a simple roll bar.

Forward half of the interior is still intact so there's some work to do there as well, thankfully most of the interior is gone already.

So be on the lookout for some WTB and some progress posts...


Welcome back, Brad

Let us know when you are ready to get started, it's about time for a Fall build party at the Chicken Shack 2.0!


Buildtoberfest?
J. Stanley
NASA-SE Region 944 Spec Series Director
Yellow #60
Reply Quote

Re: Want to get started 7 years, 2 months ago #21802

  • AgRacer
  • OFFLINE
  • Administrator
  • Posts: 712
The cage and other interior stuff like safety equipment are really the biggest hurdles. We have a transition allowance for headers, so you can run another 25 pounds for your first 4 races and leave the exhaust as it is. You could prolly come out even selling the spherical bearings and replacing with Delrin/poly. Brakes are fairly easy, as the stock stuff is cheap and plentiful. Aside from the sphericals, sounds like the car is fairly well setup on the suspension. There are cars available in the for sale section that are not far away and ready to race out of the box.

944spec.org/944SPEC/forum/for-sale-944-cars/21697-944-spec

This one was built by Barber Raceworks, who builds very good cars. Just need to weigh the options of starting to do DE events with your current car and un-mod it as you go, working to get into comp school later, or buy a car ready to go and maybe get into comp school sooner.
J. Stanley
NASA-SE Region 944 Spec Series Director
Yellow #60
Reply Quote
Reply Topic
New Topic
944-SPEC
Racing Discussion
General
Banner
Powered by Kunena
Time to create page: 0.08 seconds